Heat Pump Installation in Livonia, MI — OnPoint HVAC

Heat pump technology has come a long way, and for Livonia homeowners, the question is no longer whether heat pumps work in Michigan — it's whether the right heat pump is selected, properly sized, and correctly installed for your specific home. At OnPoint HVAC, licensed mechanical engineer George Petrentzev leads every heat pump installation with the same engineering rigor we apply to every system we put in: a Manual J load calculation first, equipment selection second, and installation to manufacturer specifications throughout.


We're a family-owned HVAC contractor based right here in Livonia at 27788 Joy Road. We've installed heat pump systems across Wayne County in homes ranging from 1950s ranch houses with original ductwork to newer, well-insulated builds. The approach is the same every time, we size the system for your home, not for the next size up from what we have on the truck.


Outdoor air conditioner unit beside a brick house on a concrete pad surrounded by grass

Why Cold Climate Heat Pumps Work in Livonia, MI

Standard heat pumps lose efficiency rapidly as outdoor temperatures drop below 35°F, which historically made them a poor choice for Metro Detroit winters. Cold climate heat pumps solve this problem. Modern cold climate models maintain strong heating output at outdoor temperatures as low as -13°F to -22°F — well below anything a typical Livonia winter will deliver.


For Livonia homes, OnPoint HVAC specifies cold climate-rated equipment as the baseline for any all-electric heat pump installation. A standard heat pump is not a cost-saving alternative in Michigan, it's an undersized system that will run its electric resistance backup continuously during the coldest months, wiping out the efficiency advantage entirely.

Technician testing an open electrical breaker panel with a meter in a utility room

Heat Pump Installation Options for Livonia Homes

Cold Climate Air-Source Heat Pump (Full Replacement)


For Livonia homeowners replacing an aging furnace and air conditioner, a cold climate air-source heat pump with a matching air handler handles both heating and cooling from a single system. This works best in well-insulated homes with existing, properly sized ductwork. We include a ductwork assessment with every installation to confirm your existing system can support the new equipment's airflow requirements.


Dual-Fuel Heat Pump System


A dual-fuel system pairs a cold climate heat pump with a gas furnace. The heat pump handles heating efficiently during mild to moderately cold weather — which represents the majority of Livonia's heating season — while the gas furnace takes over during the coldest days. For homes with existing gas infrastructure, this is often the most cost-effective configuration. See our Furnace Installation Livonia MI page for more on the gas side of a dual-fuel setup.


Ductless Mini-Split Heat Pump


For Livonia homes without existing ductwork, room additions, finished basements, or areas that existing systems don't reach adequately, ductless mini-split heat pumps deliver heating and cooling directly to individual spaces without ductwork. Multi-zone systems can serve an entire home from a single outdoor unit. Learn more on our Ductless Mini Splits page.

Our Heat Pump Installation Process

Step 1 — Manual J Load Calculation


Before any equipment is selected, George Petrentzev performs a room-by-room Manual J load calculation for your Livonia home. This uses your home's square footage, insulation levels, window area and orientation, ceiling heights, infiltration rate, and local climate data to determine the precise heating and cooling load your system must meet. This is the only accurate way to size HVAC equipment.


Step 2 — Equipment Selection


Based on the load calculation and your home's configuration, we recommend specific equipment — manufacturer, model, capacity, and efficiency tier — with a clear explanation of why. We evaluate cold climate performance ratings at low ambient temperatures, not just HSPF2 ratings measured at 47°F, which don't reflect Michigan operating conditions.


Step 3 — Installation


Our licensed technicians install the system according to manufacturer specifications and Michigan mechanical codes — proper refrigerant line sizing and insulation, correct electrical supply, accurate refrigerant charge, and fully sealed line sets. No shortcuts on installation details that affect long-term reliability.


Step 4 — Commissioning and Verification


After installation we commission the system fully — verifying refrigerant charge, confirming airflow at every register, testing the defrost cycle, and validating backup heat staging. We don't hand over a new heat pump without confirming it's operating correctly at every stage.

Financial Incentives for Livonia Homeowners

  • Federal Tax Credit (IRA Section 25C): Qualifying heat pump installations may be eligible for a federal tax credit of up to 30% of equipment and installation costs, up to $2,000 per year.


  • Michigan Utility Rebates: Several Michigan utilities offer rebates for qualifying heat pump installations. OnPoint HVAC provides current rebate information at the time of your estimate.


  • HVAC Financing: We offer financing options to make a properly sized system accessible without the full upfront cost.

Heat Pump Installation Cost in Livonia, MI

A complete heat pump installation — outdoor unit, air handler or furnace pairing, electrical work, refrigerant line set, and commissioning, typically ranges from $6,000 to $14,000 or more depending on system type, home size, and whether ductwork modifications are needed. Federal tax credits and utility rebates can meaningfully reduce the net cost.


OnPoint HVAC provides free, detailed, itemized estimates so you know exactly what you're paying for before committing.

Why Choose OnPoint HVAC for Heat Pump Installation in Livonia

  • Locally Based in Livonia: We're at 27788 Joy Road — not dispatching from across the county.


  • Engineer-Led Design: George Petrentzev is a licensed mechanical engineer. Every system is engineered for your home.


  • Cold Climate Expertise: We only recommend and install cold climate-rated equipment for Michigan homes. No standard heat pumps in a Michigan winter.


  • Licensed and Insured: Full Michigan contractor licensing and liability insurance on every project.


  • Transparent Pricing: Detailed written estimate before any work begins. No surprise fees.


  • Warranty-Backed Work: Manufacturer equipment warranties plus workmanship warranty on every installation.

Frequently Asked Questions — Heat Pump Installation in Livonia, MI

  • Do heat pumps actually work in Livonia, MI winters?

    Cold climate heat pumps do — standard heat pumps don't, at least not efficiently. Modern cold climate models maintain effective heating output well below 0°F. OnPoint HVAC only recommends cold climate-rated equipment for Livonia homes, sized based on your home's actual heat loss.

  • How much does heat pump installation cost in Livonia?

    A complete installation typically ranges from $6,000 to $14,000 or more depending on system type, home size, and whether ductwork modifications are needed. Federal tax credits and Michigan utility rebates can significantly reduce the net cost. Request a free estimate for accurate pricing on your specific project.

  • How long does heat pump installation take?

    A typical installation in an existing Livonia home takes one to two days. Dual-fuel installations requiring a new furnace may take an additional day. Ductless multi-zone installations vary based on the number of indoor units and routing complexity.

  • Is a heat pump cheaper to operate than a gas furnace in Livonia?

    It depends on current gas and electricity rates, your home's insulation, and the specific equipment. For the mild-to-moderate cold that makes up the majority of Livonia's heating season, a cold climate heat pump typically costs less to operate than a gas furnace. For the coldest days, a dual-fuel system captures the best of both. OnPoint HVAC can model operating cost comparisons at your free estimate.

  • Do I need to upgrade my electrical service for a heat pump in Livonia?

    Many Livonia homes with 200-amp service can accommodate a heat pump without a panel upgrade. Older homes with 100-amp service or limited panel capacity may require an electrical upgrade. We assess your electrical system as part of every heat pump estimate and coordinate with our electrical team if upgrades are needed.

AREAS WE SERVE